Using blocks in proxy ports

Moderator: Moderators

Using blocks in proxy ports

Postby JuS » Tue Jul 30, 2019 3:15 am

Hello,

I'm trying to build a System, where two blocks are connected via proxy ports. However, the flow property type in the interface block should be defined in an other block.
In my example I have a block called "water", which has two values (temperatur and flow rate). In this case both values are "real" to make the example file easier. "Water" should be the type of my flow property "waterflow" in the interfaceBlock "waterConnection". However, simulating this model does not transfer the values inside "water" from one block to the next. To be precise: setting "startWater" value in block "A" does not result in a "endWater" value in block "B"
Seeing https://docs.nomagic.com/display/SYSMLP190/Proxy+Port I thought it would be possible to do so.

The attached models and pictures are based on the thread https://community.nomagic.com/post15057.html?hilit=proxy%20port#p15057 and used the attached example provided by the customer support.

The minimum "(not) working" example is
mwe_blockProxy.mdzip

The original part still works, however the added part does not.

Kind regards,
Justus
You do not have the required permissions to view the files attached to this post.
Justus.Siebrecht@imse.rwth-aachen.de
MSE – Institute for Machine Elements and Systems Engineering
RWTH Aachen University, Germany
JuS
Forum Newbie
Forum Newbie
 
Posts: 8
Posts Rating:0
Joined: Mon Jul 22, 2019 3:06 am

Return to Cameo Simulation Toolkits

Who is online

Users browsing this forum: No registered users and 0 guests