Cameo EA: Missing signals on IBD

Other topics that do not fit in any of categories.

Moderator: Moderators

Cameo EA: Missing signals on IBD

Postby neal.london@lmco.com » Wed Dec 11, 2019 7:13 pm

In Cameo Enterprise Architect (19): I committed changes to an IBD (after saving), and the signals on the connectors disappeared, except for a few of them. The signals and the item flows they are on are still in the model (I see them in the containment pane). I looked at the spec for the connectors, and the Conveyed Information has the signals. I figured it was some type of display toggle (Symbol Properties), but I could not find a way to 'turn on' display of the signals.I compared the Symbol Properties of the connectors without the signals displaying to the few connectors that still had the signals displayed, and there were no differences.
1) How can I 'turn on' display of the signals on the connectors?
2) If no way, is there a less painful way to get the signals on the connectors than re-dropping them on the connectors individually?
neal.london@lmco.com
Forum Newbie
Forum Newbie
 
Posts: 1
Posts Rating:0
Joined: Fri Nov 29, 2019 2:26 pm

Re: Cameo EA: Missing signals on IBD

Postby ramyar.jahani14256@gmail.com » Thu Nov 24, 2022 12:06 am

A send signal action in an activity can create a signal instance with the values of its structural features. For example, the signal MySignal shown in the first figure below. It contains three properties which are: attrib1, attrib2, and attrib3. They are created with Real, String, and Boolean respectively.

MyHTSpace.com
ramyar.jahani14256@gmail.com
Forum Newbie
Forum Newbie
 
Posts: 1
Posts Rating:0
Joined: Thu Nov 24, 2022 12:01 am


Return to Other

Who is online

Users browsing this forum: No registered users and 0 guests

cron